home *** CD-ROM | disk | FTP | other *** search
- REM ╔══════════════════════════════════╗
- REM ║ FLCS & TQS file (v1.0) ║
- REM ║ for ║
- REM ║ MechWarrior II by Activision ║
- REM ╚══════════════════════════════════╝
- REM Written & tested by Hans Liss, 100065,1366
- REM
- REM This setup uses the joystick for torso movement and the index finger
- REM hat on the TQS for steering. It is configured for analog throttle and
- REM if you have an RCS it would be pretty easy to modify it for that.
- REM (I would put the Steer Left/Right function on the pedals..)
-
- USE TQS
- USE FCLK
- RATE 60
-
- MDEF MECH2
-
- BTN S1 Target_Nearest
- BTN S3 Target_Under_Reticle
- BTN S4 Select_NavPoint
-
- REM H1=LARGE HAT AT TOP OF FLCS
- BTN H1U Glance_Up
- BTN H1D Glance_Down
- BTN H1L Glance_Left
- BTN H1R Glance_Right
-
- REM H2=SMALL HAT BELOW BUTTON S2
- BTN H2L Fire_Group1
- BTN H2U Fire_Group2
- BTN H2R Fire_Group3
- BTN H2D Inspect_Target
-
- REM H3=SECOND LARGER HAT BELOW H1
- BTN H3L /H Jump_Left
- BTN H3R /H Jump_Right
- BTN H3U /H Jump_Forward
- BTN H3D /H Jump_Backward
-
- REM H4=HAT ON LEFT SIDE OF FLCS
- BTN H4L Eye_Left
- BTN H4R Eye_Right
- BTN H4U Eye_Up
- BTN H4D Eye_Down
-
-
- REM ****************************TQS SETTINGS*******************************
-
- REM BUTTONS T1 THRU T10 ARE USED BY THE TQS.
- BTN T2
- BTN T3
- BTN T4 /H Steer_Right
- BTN T5 /H Steer_Left
- BTN T6 Override_Shutdown
- BTN T8 /H JumpJet
- BTN T7 /P Reverse
- /R Reverse
- BTN T9 /P /N Satellite_Uplink
- /R /N Satellite_Uplink REM Off...
- BTN T10 /P Objectives
- /R Objectives
-
- rem THR 2 9 1 1 2 3 4 5 6 7 8 9 0
-
- REM USE THE MINIMUM THROTTLE BUTTON SETTING TO CONTROL THE THROTTLE WHEN
- REM PULLED FULLY BACK.
- REM
- rem BTN MT 1
-
- RNG 1 25 Zoom_In Zoom_Out
- ANT 1 4 Target_Next Target_Prev Target_Nearest
-